ALLDAQ I2C multiplexer, buffer, isolator, level shifter With the I2C multiplexer boxes from ALLDAQ you have numerous possibilities to expand your I2C structures and make them more run-sensitive. I2C Multiplexer: An I2C master channel is generated via USB, which is directly available and additionally addresses an integrated multiplexer module. This I2C bus is then extended to up to 3 additional channels. The multiplexer has 8 switchable I2C addresses, so that other boxes can be used simultaneously and several slaves with identical I2C addresses can be used. I2C Verlängerung: In addition to the conventional I2C bus, the ADQ-I2C modules also offer specially buffered interfaces. Thus, 2 boxes can be used as an extension to cover distances of several 100 meters over a 2-wire twisted pair cable. I2C Isolator: The buffered SCL/SDA lines are capacitively isolated to provide protection against ground loops, for example, if the GND reference of the terminals differs such as when using long cables. I2C Level-Shifter: The internal pull-ups at 5V can be switched off by software. Thus, external pull-ups can also be used to work with other voltage levels

The ALLDAQ ADQ-63 is an I2C multiplexer, buffer, isolator and level shifter I2C Multiplexer: The I2C "master channel" at the input can be designed as a standard I2C or as an ADQ link. This addresses a multiplexer module. This I2C or ADQ-Link bus is then extended to up to 3 additional channels. The multiplexer has 8 switchable I2C addresses, so that other boxes can be used simultaneously around several slaves with identical I2C addresses. I2C Extension: In addition to the conventional I2C bus as output, the ADQ-I2C modules also offer specially buffered interfaces - the ADQ-LINK. This allows 2 boxes to be used as an extension to cover long distances of several 100 meters via a 2-wire twisted pair cable. At the end a conventional I2C can be picked up again. See also the ADQ-63 or ADQ-151/-63 kit. I2C Isolator: The buffered SCL/SDA lines are capacitively isolated to provide protection against ground loops, for example in case of different GND reference of the end devices on long lines. I2C Level Shifter: The internal pull-ups at 5V can be switched off by software. Thus, external pull-ups can be used to work with other voltage levels Note: The power supply can be provided via any interface. The supply cable must be max. 2m.

USB 2.0 high-speed isolator for galvanic isolation - ideal for measurement technology and audio applications Supports high-speed USB 2.0 devices up to 480?Mbit/s Protection against overvoltage for computers and USB devices Effectively interrupt ground loops Features USB 2.0 high-speed isolator uses the latest isolator technology for data rates up to 480?Mbit/s (USB 1.0/1.1 compatible) Automatic detection of the transfer rate Bidirectional communication Isolation: 500?V / <?60?Hz (permanent) Overvoltage protection: max. 680?V Supply for USB device: Without ext. supply max. 300?mA With ext. 5?V supply (opt.): max. 1?A USB connection: Host: USB 2.0 type B socket Device: USB 2.0 type A socket Operating temperature: -40°C..+75°C Storage temperature: -55°C..+125°C Relative humidity: max. 95% Robust aluminium housing Dimensions incl. rubber buffer (L x W x H): 90 mm x 62 mm x 32 mm Operating system-independent - no drivers need to be installed Scope of delivery USB 2.0 high-speed isolator USB cable (USB 2.0-A plug to USB 2.0-B plug) with ferrite core (length: 0.5 m) Quick start guide Safety note: This model is not approved for medical applications. Medical certification according to UL 1577 on request.

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Application examples Potential isolation between measuring devices and PC Effective suppression of ground loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling different earth potentials in industrial control technology Can also be used as a power injector for USB devices that are normally supplied via the USB port, but this does not provide sufficient power for reliable operation of the USB device** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5 Gbps Re-clocking technology for all speeds Backward compatible with USB 2.0/1.1/1.0*** Isolation voltage (data and supply)*: up to 1?kV permanently! Maximum current for USB 3.0 devices: Without external power supply: max. 200?mA With external power supply: max. 900?mA USB connection: Host: USB 3.0 type B socket Device: USB 3.0 type A socket Operating temperature: -20°C..+70°C Relative humidity: max. 95% Robust aluminium housing with rubber bumper Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Optional mounting kit for DIN rail Scope of delivery USB 3.0 SuperSpeed isolator USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed Safety note: This model is not approved for medical applications.     *ADQ-USB 3.0-ISO(-PS): 1?kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6?kVDC (60?s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5?V plug-in power supply included. ADQ-USB 3.0-ISO-W: External power supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the device side (downstream). The cascading of multiple USB isolators is not supported.

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Variant of the ADQ-USB 3.0-ISO with wide-range input from 10 V to 36 V to supply the USB device. Ideal for mobile use in cars or lorries, in industrial control environments and wherever there is no 5 V supply available. Application examples Potential separation between measuring devices and PC Effective suppression of ground loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling different earth potentials in industrial control technology Can also be used as a power injector for USB devices that are normally supplied via the USB port, but this does not provide sufficient power for reliable operation of the USB device** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5 Gbit/s Re-clocking technology for all speeds Backwards compatible with USB 2.0/1.1/1.0*** Isolation voltage*: 1.6 kVDC (60 s) Maximum current for USB 3.0 devices: max. 900 mA (with external supply) USB connection: Host: USB 3.0 type B socket Device: USB 3.0 type A socket Operating temperature: -20°C..+70°C Relative humidity: max. 95% Robust aluminium housing with rubber bumper Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Optional mounting kit for DIN rail Scope of delivery USB 3.0 SuperSpeed isolator 2-pin mating connector with locking mechanism USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed Safety note: This model is not approved for medical applications.     *ADQ-USB 3.0-ISO(-PS): 1 kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6 kVDC (60 s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5 V plug-in power supply included in the scope of delivery. ADQ-USB 3.0-ISO-W: External power supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the device side (downstream). The cascading of multiple USB isolators is not supported.

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Application examples Potential separation between measuring instruments and PC Effective suppression of hum loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling of different ground potentials in industrial control technology Also usable as "power injector" for USB devices which are normally powered via the USB port, but which does not provide sufficient power for reliable operation of the USB device ** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5?Gbit/s Re-Clocking technology for all speeds Download compatible with USB 2.0/1.1/1.0*** insulation voltage*: up to 1?kVDC permanent! Maximum power for USB 3.0 devices: Without external power supply: max. 200?mA With external power supply: max. 900?mA USB connection: Host: USB 3.0 Type B socket Device: USB 3.0 Type A socket Operating temperature: -20°C..+70°C Rel. air humidity: max. 95% Robust aluminium chassis with rubber buffer Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Safety instruction: This model is not approved for medical device applications.    *ADQ-USB 3.0-ISO(-PS): 1?kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6?kVDC (60?s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5?V plug-in power supply included in delivery. ADQ-USB 3.0-ISO-W: External supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the downstream side. The cascading of multiple USB isolators is not supported. Scope of delivery: USB 3.0 SuperSpeed Isolator Matching plug-in power supply (5?VDC/1.4?A) with 5.5?mm low-voltage connector with bayonet connection USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Application examples Potential isolation between measuring devices and PC Effective suppression of ground loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling different earth potentials in industrial control technology Can also be used as a power injector for USB devices that are normally supplied via the USB port, but this does not provide sufficient power for reliable operation of the USB device** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5 Gbps Re-clocking technology for all speeds Backward compatible with USB 2.0/1.1/1.0*** Isolation voltage*: up to 1?kVDC permanently! Maximum current for USB 3.0 devices: Without external power supply: max. 200?mA With external power supply: max. 900?mA USB connection: Host: USB 3.0 type B socket Device: USB 3.0 type A socket Operating temperature: -20°C..+70°C Relative humidity: max. 95% Robust aluminium housing with rubber bumper Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Security note: This model is not approved for medical applications.     *ADQ-USB 3.0-ISO(-PS): 1?kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6?kVDC (60?s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5?V plug-in power supply included. ADQ-USB 3.0-ISO-W: External power supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the device side (downstream). The cascading of multiple USB isolators is not supported. Scope of delivery: USB 3.0 SuperSpeed isolator Matching US plug-in power supply (5?VDC/1.4?A) with 5.5?mm low-voltage connector with bayonet lock USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed

ADQ-134 ADQ-S/P-DIF-Box HDMI-Kabel  

Montagekit für ADQ-USB-ISO-Serie auf DIN-Hutschiene Der Montagekit dient der schnellen und sicheren Befestigung der ALLDAQ USB-Isolatoren auf DIN-Hutschiene. Bei Bedarf können Sie die Halterung mit einer Edelstahlplatte montieren um mittels Kabelbinder die Kabel zu fixieren. Kit bestehend aus: Kunststoffwanne (blau) Hutschienenklammer / Tragschienenadapter (TS35), 45 mm breit Stabile Zugentlastung aus Edelstahl Geeignet für alle ALLDAQ USB-Isolatoren der ADQ-USB-ISO-Serie. Hutschiene nicht im Lieferumfang.

Komplett mit sicherem Rack-Montagesatz. Desktop Robuste, abnehmbare und verstellbare Füße an der Unterseite des Geräts sorgen für einen perfekten Neigungswinkel für den Einsatz auf dem Schreibtisch

Ein Modul, um sie alle zu verwalten. Fügen Sie einen Einbaucomputer Ihrer Wahl hinzu und lassen Sie das Boss-Modul Ihre Geräte verwalten. Ausgestattet mit einem RFID-Lesegerät und einem 5-Zoll-Farb-LCD-Bildschirm (Computer nicht im Lieferumfang enthalten). ModIT Smart Docking & Ladestation für Mobiltelefone (iPhone) Tippen, greifen, los. Laden, Bereitstellen und erneutes Bereitstellen eines gemeinsamen Pools von iOS-Geräten. Speichern, laden und synchronisieren Sie bis zu 16 iPhones im eigenständigen, intelligenten USB-Hub, modularem, intelligentem Lade- und Dockingstation-Mobiltelefonsystem. Es macht die Nutzung einer großen Anzahl gemeinsam genutzter Mobiltelefone (unabhängig von Marke oder Modell) an Ihrem Arbeitsplatz viel einfacher und intelligenter. In Kombination mit dem Apple Provisioning Utility (APU) können Unternehmen ihre mobilen Geräte steuern, indem sie die Gerätebereitstellung automatisieren, die Supportkosten senken und die Effizienz der Arbeitsabläufe verbessern. Perfekt zur gemeinsamen Nutzung Stärken Sie Schichtarbeiter, teilen Sie Geräte zum Testen und machen Sie mit Mobiltelefonen alles, was Sie für möglich gehalten haben. Zentrale und individuelle Torverriegelung zur Sicherung Ihrer Mobiltelefone vorhanden. Von der IT über Gesundheit und Sicherheit bis hin zu den Benutzern profitiert das gesamte Unternehmen von einem zentralen Punkt zum Aufladen und Aufbewahren sowie zum einfachen und unkomplizierten Teilen von Geräten. Symbol ?Von der Community überprüft?

16 USB 3.2 ports for mobile phones Thunderbolt? 3 host port & daisy chain port Transfer data at 40Gbps vs 480Mbps for standard USB 2 hubs.

1 x USB Type-C host ports to connect to a computer Input/Output Connectors: 4 x USB Type-C for USB C devices Input Voltage: 24Vdc Input Current: 15A Input Connection: 4-pin DIN Output Voltage: 3V to 21V Output Current: 3A Max per Port Output Power: 60W Max per Port Output Power (Total): 200W Maximum Power Supply: Input Voltage: 100-250Vdc Input Current: 2.5A @ 115 Vac Input Frequency: 50-60Hz Input Connector: C14 Output Voltage: 24Vdc Output Current: 8.5A Output Power: 200W Output Connector: 4-pin DIN Ambient Operating Temperature Range: 0 ~ 35°C Relative humidity: 5% to 95% non-condensing

16 x USB 2 ports for USB 2 devices 1 x USB 2 host ports for connecting to a computer Input/Output Connectors: 16 x USB Type-A Input Voltage: 12Vdc Input Current: 15A Input Connection: 4-pin DIN Output Voltage: 5.2V Output Current: 2.1A Max per Port Output Power: 10W Max per Port Output Power (Total): 163.8W Maximum Power Supply: Output Voltage: 5.2V Input Voltage: 100-250Vdc Input Current: 2.5A @ 115 Vac Input Frequency: 50-60Hz Input Connector: C14 Output Voltage: 12Vdc Output Current: 15A Output Power: 180W Output Connector: 4-pin DIN Ambient Operating Temperature Range: 0 ~ 35°C Relative humidity: 5% to 95% non-condensing

15 x USB 2 ports for USB 2 devices 1 x USB 2 host ports to connect to a computer Input/Output Connectors: 16 x USB Type-A Input Voltage: 12Vdc Input Current: 15A Input Connection: 4-pin DIN Output Voltage: 5.2V Output Current: 2.1A Max per Port Output Power: 10W Max per Port Output Power (Total): 163.8W Maximum Power Supply: Output Voltage: 5.2V Input Voltage: 100-250Vdc Input Current: 2.5A @ 115 Vac Input Frequency: 50-60Hz Input Connector: C14 Output Voltage: 12Vdc Output Current: 15A Output Power: 180W Output Connector: 4-pin DIN Ambient Operating Temperature Range: 0 ~ 35°C Relative humidity: 5% to 95% non-condensing

PowerPad8S Input Voltage: 12Vdc Input Current: 15A Input Connection: 4-pin DIN Output Voltage: 5.2V Output Current: 2.1A Max per Port Output Power: 10W Max per Port Output Power (Total): 87.36W Maximum Input/Output Connectors: 9 x USB Type-A, 1 x 4-pin DIN Ambient Operating 0 ~ 35°C Temperature Range: Relative humidity: 5% to 95% non-condensing Dimensions (approx.): 198.4 long x 73 wide x 40 high mm Approximate weight: 1.6 kg (inc PSU)

15 x USB 3.2 ports for USB 2 and USB 3 devices 1 x USB 3.2 host ports to connect to a computer Input/Output Connectors: 16 x USB Type-A Input Voltage: 12Vdc Input Current: 15A Input Connection: 4-pin DIN Output Voltage: 5.2V Output Current: 2.1A Max per Port Output Power: 10W Max per Port Output Power (Total): 163.8W Maximum Power Supply: Output Voltage: 5.2V Input Voltage: 100-250Vdc Input Current: 2.5A @ 115 Vac Input Frequency: 50-60Hz Input Connector: C14 Output Voltage: 12Vdc Output Current: 15A Output Power: 180W Output Connector: 4-pin DIN Ambient Operating Temperature Range: 0 ~ 35°C Relative humidity: 5% to 95% non-condensing

Der Cambrionix ThunderSync3-16 (TS3-16) wurde entwickelt, um Hochgeschwindigkeitsdatenübertragungen zu USB3-kompatiblen Geräten zu ermöglichen, ohne durch Endpunktgrenzen eingeschränkt zu werden.Durch die Verwendung einer Upstream-ThunderboltTM 3-Schnittstelle ist der TS3-16 in der Lage, an allen 16 Ports bis zu 5 Gbit/s zu liefern. Dank seiner ThunderboltTM -Schnittstelle ist das TS3-16 in der Lage, die Endpunktbegrenzung zu umgehen, die normalerweise bei dem Versuch beobachtet wird, mehr als 15 USB3.2-Geräte aufzuzählen und bis zu 96 Geräte von einem einzigen Computer aus aufzuladen und zu synchronisieren, ohne die Endpunktbegrenzung zu erreichen.Das TS3-16 liefert 12 Watt Ladeleistung an jeden seiner 16 Anschlüsse, so dass mobile Geräte sicher und zuverlässig mit der vom Hersteller empfohlenen optimalen Rate (bis zu 2,4 A pro Anschluss) geladen werden können. Die beiden ThunderboltTM 3-Anschlüsse auf der Rückseite liefern jeweils 15 Watt.Wenn ein lokaler (Host-)Computer angeschlossen ist, kann der Host den Betrieb jedes einzelnen Anschlusses mit der von Cambrionix bereitgestellten Software steuern.Der Ladevorgang und die Synchronisation der Geräte können über die LiveViewer App von Cambrionix, die Anwendungsprogrammierschnittstelle (API) oder die Befehlszeilenschnittstelle (CLI) überwacht werden. Die TS3-16-Firmware kann auch aktualisiert werden, um neue Ladeprofile hinzuzufügen und sicherzustellen, dass der TS3-16 die neuesten Geräte laden kann. Weitere Informationen zu unserer Software finden Sie weiter unten.Was im Lieferumfang enthalten istDie folgenden Teile werden für die Verwendung des TS3-16 benötigt und sind im Lieferumfang enthalten:Das TS3-16 Gerät Einbausatz für die Rackmontage

DatenDank seiner fortschrittlichen internen Architektur ist der TS3-C10 der weltweit schnellste Thunderbolt-zu-USB-Hub und bietet einen bis zu 10-fachen Geschwindigkeitsschub im Vergleich zu Standard-Hubs, die USB als Host-Schnittstelle verwenden.AufladenUSB Typ-C Lademodi (bis zu 3A/15W) und die Möglichkeit, jeden Anschluss zu steuern und zu überwachen.APIUnsere plattformübergreifende API bietet volle Kontrolle über das Produkt und die Möglichkeit, USB- und batteriebezogene Informationen vom angeschlossenen Gerät abzurufen.LiveViewerEine Mac/Win/Linux-Anwendung, die als GUI für die API dient. Alles, was Sie mit der API tun können, können Sie auch mit LiveViewer tun und umgekehrt. Es kann als Evaluierungstool für die API oder als voll funktionsfähige Steuerungs-/Überwachungsanwendung für das TS3-C10 verwendet werden.Kommandozeilen-SchnittstelleVerbinden Sie sich einfach über die Terminalschnittstelle und geben Sie an der Eingabeaufforderung "help" ein, um eine Liste der Befehle zu erhalten.SkalierbarkeitBei Verwendung von USB2.0-Geräten können Sie Ihr TS3-C10-System auf 30 Downstream-Ports skalieren, ohne dass es zu nennenswerten Datenengpässen kommt. Dies ist dank der verfügbaren Bandbreite über die Thunderbolt 3-Schnittstelle möglich.MontageVESA-Befestigungspunkte an der Unterseite ermöglichen mehrere Montageoptionen.