Go to homepage
Your account
Log in
or sign up
Overview Your profile Addresses Payment methods Orders
€0.00*
Home
Products
The company
Catalogues
Support
Downloads
Show all Products
ALLDAQ Messtechnik
Analog
In
Out
Stromsenken
Multi I/O
Relais
19" Systeme
SET
Digital-I/O
Signalkonditionierung
SCU
Zubehör
Kalibration
Anschlussblöcke
Kabel
Laborinstrumente
Multimeter
Siglent SDM3000X-Serie
Oszilloskope
Siglent SDS1000 Serie
Siglent SDS1000X-E Serie
Siglent SDS2000X Serie
Siglent SDS2000X-Plus Serie
Siglent SDS5000X Serie
Siglent SDS6000 Serie
Siglent SHS800-Serie
Logic Analyzer
Signalgeneratoren
Siglent SDG800-Serie
Siglent SDG1000X-Serie
Siglent SDG2000X-Serie
Siglent SDG6000X-Serie
Siglent SSG3000X-Serie
Spektrumanalysatoren
Siglent SSA3000X-Plus-Serie
Siglent SSA3000X-R-Serie
Siglent SVA1000X Serie
Siglent SNA5000 Serie
Siglent SSA3000X-Serie
Labornetzgeräte
Siglent SPD1000X-Serie
Siglent SPS5000X-Serie
Siglent SPD3303C-Serie
Siglent SPD3303X/X-E-Serie
Mikroskope
Zubehör
Elektronische Lasten
Siglent SDL1020X / X-E
Messen, Steuern, Regeln
Messen-Steuern-Regeln über IP
MSR-Zentralen
Multiplexer
Aktoren
Sensoren
Analoge Erfassung, Multi-I/O
Analoge Ausgabe
...nach Produktfamilien
ADQ-LB Serie
ADQ-10-Serie
ADQ-210-Serie
ADQ-250-Serie
ADQ-330/340-Serie
ADQ-412
ADQ-610-Serie
Kabel-Testsysteme
Zubehör Hard-/Software
Dienstleistungen
Basisgeräte & Erweiterungen
M2Z
M3Z
HVX
M4
Basisgeräte & Erweiterungen
M3U
Interface-Platinen
Cami Reserarch
Zubehör Hardware
Messinstrumente & Netzgeräte
Zubehör für Cleverscope
EMV-Messtechnik
EMV-Precompliance-Hardware
EMV Abschirmungen
EMV Antennen
EMV Kopplungs- u Entkopplungsnetzwerke CDN
HF Stromwandler
Netznachbildungen (LISNs)
TEM-Zellen
HF-Verstärker
HF-Kabel
EMV-Zubehör
EMV-Precompliance-Software
Schnittstellen
Konverter
Zubehör
Hubs
USB
Sonstige
Isolatoren
USB
USB-MED
LAN
Laborausstattung
Digital-Mikroskope
Vorwort
Entwicklung
RMA
Software
Show all categories Logic Analyzer Back
  • Show Logic Analyzer
  1. Products
  2. Laborinstrumente
  3. Logic Analyzer
  • Products
    • ALLDAQ Messtechnik
    • Laborinstrumente
      • Multimeter
      • Oszilloskope
      • Logic Analyzer
      • Signalgeneratoren
      • Spektrumanalysatoren
      • Labornetzgeräte
      • Mikroskope
      • Zubehör
      • Elektronische Lasten
    • Messen, Steuern, Regeln
    • Kabel-Testsysteme
    • Messinstrumente & Netzgeräte
    • EMV-Messtechnik
    • Schnittstellen
    • Laborausstattung
  • The company
  • Catalogues
  • Support
Filter
–
Saleae Logic 8 Black
Saleae Logic 8 Black
PC based 8 channel logic analyser with a maximum digital sampling rate of 100 MSa/s and parallel analogue sampling with 10 MSa/s (10 bit, 1 MHz analogue bandwidth). Almost unlimited memory depth through the use of PC memory. The Logic 8 is a logic analyser with particularly sophisticated and user-friendly PC software that makes measuring digital signals fun. Simply connect it to your PC via USB and get started. Digital signal acquisition takes place at up to 100 MSa/s on all channels. By streaming the data via the USB 2 connection, the PC memory provides an almost unlimited storage depth. All digital channels are simultaneously recorded via an analogue-digital converter and can therefore be displayed in analogue as well as digital form. At 10 MS/s, the analogue acquisition of the Logic 8 is slower than the digital acquisition, but offers a high 10-bit resolution and therefore a good insight into the analogue signal behaviour. The bandwidth of the analogue acquisition is specified at 1 MHz (-3db), whereby at this frequency the signal is already significantly altered and attenuated in accordance with the bandwidth specification. Due to their size, Saleae's logic analysers are perfect for mobile use and take up very little space on the workbench. The logic analysers from Saleae stand out in particular with their sophisticated and user-friendly operating software. It is very intuitive to use and has all the important features such as serial decoding of various bus systems, simultaneous analogue display of signals, an extremely large memory depth and much more.     Logic 8 Logic Pro 8 Logic Pro16 Inputs               Analog and Digital     8 8 16         Digital Input               Maximum Sample Rate 100MS/s 500MS/s 500MS/s Maximum digital input frequency 25MHz 100MHz 100MHz Supportet Logic Levels 1.8V - 5.5V 1.2V - 5.5V 1.2V - 5.5V Threshold Voltage 0,6V low / 1,2V high 0,6V / 0,9V / 1.,5V 0,6V / 0,9V / 1.,5V         Analog Input               Maximum Sample Rate 10 MS/s 50 MS/s 50 MS/s Bandwidth 1 MHz 5 MHz 5 MHz Resolution 10 Bits 12 Bits 12 Bits Input Voltage Range 0 V to 5 V -10 V to 10 V -10 V to 10 V USB Rev. 2.0 3.0 3.0   Scope of delivery: Logic analyzer 2x4 test line per port 8x test clip per port USB cable carry bag      

€748.50*
Saleae Logic Pro 16
Saleae Logic Pro 16
PC-based 16-channel logic analyser with a maximum digital response of 500 MSa/s and an analogue response of 50 MS/s (12 bit, 5 MHz analogue bandwidth). Unlimited memory depth due to the PC memory. The Logic Pro 16 is a professional logic analyser with sophisticated and user-friendly PC software that makes digital measurement fun. Simply plug in via USB and go. The digital acquisition rate is 500 MSa/s on each channel. Due to the streaming and USB 3 interface to the PC, the memory depth is unlimited. The logics also show analogue signals, as all digital channels are captured simultaneously with the A/D converter. At 50 MS/s, analogue recording is slower than digital recording, but it offers a high resolution of 12 bits, providing an insight into the analogue signal behaviour. The bandwidth of the analogue recording is 5 MHz (-3db). But the signal is already attenuated at this point. The Saleae logic analyser is perfect for mobile use because of its handbag size.     Logic 8 Logic Pro 8 Logic Pro16 Inputs               Analog and Digital     8 8 16         Digital Input               Maximum Sample Rate 100MS/s 500MS/s 500MS/s Maximum digital input frequency 25MHz 100MHz 100MHz Supportet Logic Levels 1.8V - 5.5V 1.2V - 5.5V 1.2V - 5.5V Threshold Voltage 0,6V low / 1,2V high 0,6V / 0,9V / 1.,5V 0,6V / 0,9V / 1.,5V         Analog Input               Maximum Sample Rate 10 MS/s 50 MS/s 50 MS/s Bandwidth 1 MHz 5 MHz 5 MHz Resolution 10 Bits 12 Bits 12 Bits Input Voltage Range 0 V to 5 V -10 V to 10 V -10 V to 10 V USB Rev. 2.0 3.0 3.0 Scope of delivery: Logic analyzer 2x4 test line per port 8x test clip per port USB cable carry bag  

€1,499.00*
Saleae Logic Pro 8 Black
Saleae Logic Pro 8 Black
PC based 8 channel logic analyser with a maximum digital sampling rate of 500 MSa/s and parallel analogue sampling at 50 MSa/s (12 bit, 5 MHz analogue bandwidth). Almost unlimited memory depth through the use of PC memory. The Logic Pro 8 is a professional logic analyser with particularly sophisticated and user-friendly PC software that makes measuring digital signals fun. Simply connect it to your PC via USB and get started. Digital signal acquisition takes place at up to 500 MSa/s on all channels. By streaming the data via the USB 3 connection, the PC memory provides an almost unlimited storage depth. All digital channels are simultaneously recorded via an analogue-to-digital converter and can therefore be displayed in analogue as well as digital form. At 50 MS/s, analogue recording in Logic Pro 8 is slower than digital recording, but offers a high 12-bit resolution and therefore a good insight into the analogue signal behaviour. The bandwidth of the analogue acquisition is specified at 5 MHz (-3db), whereby at this frequency the signal is already significantly altered and attenuated in accordance with the bandwidth specification. Due to their size, Saleae's logic analysers are perfect for mobile use and take up very little space on the workbench. The logic analysers from Saleae stand out in particular with their sophisticated and user-friendly operating software. It is very intuitive to use and has all the important features such as serial decoding of various bus systems, simultaneous analogue display of signals, an extremely large memory depth and much more.     Logic 8 Logic Pro 8 Logic Pro16 Inputs               Analog and Digital     8 8 16         Digital Input               Maximum Sample Rate 100MS/s 500MS/s 500MS/s Maximum digital input frequency 25MHz 100MHz 100MHz Supportet Logic Levels 1.8V - 5.5V 1.2V - 5.5V 1.2V - 5.5V Threshold Voltage 0,6V low / 1,2V high 0,6V / 0,9V / 1.,5V 0,6V / 0,9V / 1.,5V         Analog Input               Maximum Sample Rate 10 MS/s 50 MS/s 50 MS/s Bandwidth 1 MHz 5 MHz 5 MHz Resolution 10 Bits 12 Bits 12 Bits Input Voltage Range 0 V to 5 V -10 V to 10 V -10 V to 10 V USB Rev. 2.0 3.0 3.0   Scope of delivery: Logic Analyser 2x4 test leads per port 8x test clip per port USB cable Carrying bag      

€999.00*
Service hotline

Service and Support: +49 (0)89 894 222 - 474 sales@alldaq.com

Or via our contact form.
Service
  • Imprint
  • Terms and Conditions
  • Privacy
  • Cancellation policy
  • RMA
  • Sepa

    * All prices excl. VAT plus shipping costs and possible delivery charges, if not stated otherwise.

    Realised with Shopware
    This website uses cookies to ensure the best experience possible. More information...