isolated switching output for ALL3000/3500/400x/4500/5000optoelectroniccoupler, with max. 20 mA switching current

- compatible with ALL34xx/350x/4500/5000 - Measuring range -40...+125 °C, 0...100 %RH - resolution temperature 0,01 °C, resolution humidity: 0.01 % - Measuring accuracy Temp in whole range approx. +/- 0,6° (Typical: -20 + 90° = +/- = 0,2°) - Measuring accuracy humidity in the whole range approx. +/- 3% (Typical: 0~80% +/- 1.5%) - With 1.5 m connection cable Technical Details: Humidity Sensor Specification Parameter Condition Value Units Sensor Humidity Accuracy tolerance1 Typ. ±1.5 %RH Max. -   Repeatability2 Low, typ. 0.21 %RH Medium, typ. 0.15 %RH High, typ. 0.08 %RH Resolution Typ. 0.01 %RH Hysteresis at 25°C ±0.8 %RH Specified range3 extended4 0 to 100 %RH Response time5 t63% 86 s Long-term drift Typ.7 <0.25 %RH/yr       Temperature Sensor Specification   Parameter Condition Value Units ALL3020 Accuracy tolerance1 typ., 20°C to 60°C ±0.1 °C Max. -   Repeatability2 Low, typ. 0.15 °C Medium, typ. 0.08 °C High, typ. 0.04 °C Resolution Typ. 0.01 °C Specified Range - -40 to 125 °C Response time 8 t63% >2 s Long Term Drift max <0.03 °C/yr

Threshold switch for vertical installation (pen with float-ring) made ??of polyamide, resistant to gasoline, oil, brake fluid and much more. 1 m connection cable for ALL3000/ALL4000

Compatible with ALL3000/34xx/3500/400x/4500/5000 Fluid threshold for horizontal installation (hinged float) made ??of polyamide, resistant against gasoline, oil, brake fluid, etc. With 1 m cable

Temperature measurement via network easy made Highlights: detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network Robust metal housing Brackets for attachment to wall Suitable for all operating systems 1x ALL3006 Temp-Sensor including Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API Optional Free-Software Modules like SNMP  / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean / The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage. The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems. The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/ Intelligent features and programming by switching matrix Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists. Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol.   Flexible installation options The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary.   Borderless Cross-site temperature measurement Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc. Maximum number of sensors per ALL3419:       Element Specification Sensor interface: 3x RJ45 for sensor/actor modules 1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise" 1x RJ45 Console Port for Serial-Connection Ethernet: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN 2,4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power source: 100~240 VAC, 50/60 Hz Power Consumption: <3 watt in operation Housing: metal housing Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 70 °C Storage humidity: 5% ~ 90% (non-condensing) Regulatory: CE, RoHS Dimensions: 92 x 85 x 24 mm (L x W x H)  Weight: 134 g (ALL3419 with ALL3006 sensor) Package content: -ALLNET ALL3419 -ALLNET ALL3006 temperature sensor -WLAN antenna -External power supply -Quick installation guide

Multiplexing module hub for star-shaped distribution of up to 8 sensor modules for ALL4500/ALL5000. For the operation of the ALL4404 a base station/central unit is required. With the ALL4404 you expand the possible sensors by a factor of 8. A maximum of 1x ALL4404 can be connected per master port on the central station. The maximum cable length from the I2C sensor port is max. 100m and is NOT extended by the ALL4404 i.e. the maximum cable length through the hub is still 100m. Application example:  ALL4404 (Single) ALL3419 ALL3500 ALL3505 ALL5000v2      

 Highlights:  new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use either black or white available angle fixings for wall mounting Measure, control and regulate automatically and independently   ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs.   Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location.   The ALL4406 Temperature sensor has a measuring range of -40 to +85 ° C   Temperature sensor in desktop-/ wallmounting case   measuring range of -40 to +85 °C, resolution 0,06 °C Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 Item Specification Sensor type Temperature and relative humidity Temperature measuring range: -40 to +80 °C  (resolution 0,01 °C) Humidity measuring range: 0...100 % RH (resolution 0,5%) Chip: SHT71 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: pay attention about the same types of sensors on the port! -  see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 grams (only device) package content: 1x ALL4418 Temperatore sensor 1x connection cable        Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

 Highlights:  new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use either black or white available angle fixings for wall mounting Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4406 Temperature sensor has a measuring range of -40 to +85 ° C Temperature sensor in desktop-/ wallmounting case measuring range of -40 to +85 °C, resolution 0,06 °C Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 Technical Details: Item Specification Sensor type Temperature and relative humidity Temperature measuring range: -40 to +80 °C  (resolution 0,01 °C) Humidity measuring range: 0...100 % RH (resolution 0,5%) Chip: SHT71 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: pay attention about the same types of sensors on the port! -  see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4418 Temperatore sensor 1x connection cable        Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Highlights: new flat desktop / wall mount case made of aluminium I2C bus for multiplexing use measuring range -40...+125 °C, 0...100 %RH resolution temperature 0,01 °C, resolution humidity: 0.01 % Measuring accuracy Temp in whole range approx. +/- 0.6° (Typical: -20 + 90° = +/- = 0.2°) Measuring accuracy humidity in the whole range approx. +/- 3% (Typical: 0~80% +/- 1,5%) ONLY COMPATIBLE WITH ALL34xx/350x/4500/5000 Angle brackets for wall mounting Measure, control and regulate automatically and independently ALLNET has been pursuing the concept of intelligent control of building technology processes via network and Internet for years. Intelligent building technology not only offers more comfort, but also actively promotes the saving of energy costs. Centrally controlled and accessible via network / Internet, ALLNET building automation products enable intelligent building technology independent of time and location.   Technical Details: Humidity Sensor Specification Parameter Condition Value Units Sensor Humidity Accuracy tolerance1 Typ. ±1.5 %RH Max. -   Repeatability2 Low, typ. 0.21 %RH Medium, typ. 0.15 %RH High, typ. 0.08 %RH Resolution Typ. 0.01 %RH Hysteresis at 25°C ±0.8 %RH Specified range3 extended4 0 to 100 %RH Response time5 t63% 86 s Long-term drift Typ.7 <0.25 %RH/yr       Temperature Sensor Specification   Parameter Condition Value Units ALL3020 Accuracy tolerance1 typ., 20°C to 60°C ±0.1 °C Max. -   Repeatability2 Low, typ. 0.15 °C Medium, typ. 0.08 °C High, typ. 0.04 °C Resolution Typ. 0.01 °C Specified Range - -40 to 125 °C Response time 8 t63% >2 s Long Term Drift max <0.03 °C/yr

• Compatible to ALL3000/34xx/3500/400x/4500/5000 • Contact counter in metal housing • Counts how often a contact has been closed. Max counting frequency: 1000 pulses/second • counter 6-digit decimal (0 … 999999) • 1 m cable

Compatible with ALL3000/34xx/3500/400x/4500/5000 counter in metal case, wall mount option it counts how often the contact has been closed counter frequency: 1000 Impulses/Sec 6-digit counter (0...999999) with 1 m cable

Highlights:   new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use angle fixings for wall mounting   Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4429 Combination sensor has a measuring range of 0 to 1023 mbar, -40 to +80 °C and 0...100 % RH Combination Sensor of air pressure/humidity/temperature in desktop-/ wallmounting case measuring range of 0 to 1023 mbar / -40 to +80 °C (resolution 0,01 °C) / 0...100 % RH (resolution 0,5%) Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 not compactible with ALL3000/ALL5000 Technical Details: Item Specification Sensor type air pressure, humidity, temperature air pressure measuring range: 0 to 1023 mbar Temperature measuring range: -40 to +80 °C  (resolution 0,01 °C) Humidity measuring range: 0...100 % RH (resolution 0,5%) Chip BMP085 + SHT71 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4429 Combination sensor 1x connection cable     Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.  

Highlights:   new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use either black or white available angle fixings for wall mounting   Measure, control and regulate automatically and independently   ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs.   Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location.   The ALL4432 Brightness sensor indicates the brightness as value of 0 to 100.   Brightness Sensor in desktop-/ wallmounting case   measuring range of 0 to 100 Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 (not compatible with ALL3000/400x) Technical Details: Item Specification Sensor type Brightness analog 16bit measuring range: 0 to 100 Chip ADS1100A2 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: pay attention about the same types of sensors on the port! -  see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4432 Brightness sensor 1x connection cable     Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Highlights: new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use either black or white available angle fixings for wall mounting Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4432 Brightness sensor indicates the brightness as value of 0 to 100.   Brightness Sensor in desktop-/ wallmounting case measuring range of 0 to 100 Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 (not compatible with ALL3000/400x) Technical Details: Item Specification Sensor type Brightness analog 16bit measuring range: 0 to 100 Chip ADS1100A2 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: pay attention about the same types of sensors on the port! -  see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4432 Brightness sensor 1x connection cable Multiplexing - Note to the operation of several sensors on one sensor port Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port. Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby. So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Compatible with ALL34xx/350x/4500/5000/3692 4-Port contact input in metal case with wall mount option  4Port contact input (isolated) result of open contacts is "1", closed contact is "0" - possible solutions: idle door contact with puls stretching NOT COMPATIBLE WITH ALL3000/ALL40000.

Compatible with ALL3000/ALL34xx/3500/400x/4500/5000 volt meter in metal case housing with wall mount/desktop option detect when power fit or not 4-phase, for AC voltage 220...240V isolated over relay connections: 1x RJ45 INPUT / 1x RJ45 OUTPUT

Highlights:   new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use angle fixings for wall mounting   Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4452 PIR Movement detector has a max. detection angle of 92° and a max range of 8 meters. Movement detection Sensor in desktop-/ wallmounting case max. detection angle of 92°, max. range of 8 meters Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 Technical Details: Item Specification Sensor type   PIR movement detection   measuring range: max. detection angle of 92°, max. range of 8 meters Chip PCF8574 Interfaces: 2x RJ45 (I2C Bus) Multiplexing:   dial wheel for ID (8), see note below   LED Indicators: 1x PWR, 1x BUS, 1x Detetct Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4452 PIR Movement detection sensor 1x connection cable   Multiplexing - Note to the operation of several sensors on one sensor port Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more thanone sensor on a physical port. Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby. So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Highlights: New flat desktop / wall-mounted housing made of aluminium compatible with ALL34xx/3500/4500/5000 I2C bus for multiplexing use Available in either black or white Angle brackets for wall mounting Measure, control and regulate automatically and independently ALLNET has been pursuing the concept of intelligent control of building technology processes via the network and Internet for years. Intelligent building technology not only offers more comfort, but also actively promotes energy cost savings. Centrally controlled and accessible via the network / Internet, ALLNET home automation products enable intelligent building technology regardless of time and location. The ALL4454 smoke detector/sensor can also be used for the detection of gases. The Figaro TGS813 is a MOS gas sensor based on tin dioxide (SnO2) for the reliable detection of combustible gases such as methane, propane and butane. In the presence of gases, the sensor resistance changes in proportion to the gas concentration, which enables simple and cost-efficient evaluation. Thanks to its high sensitivity, good long-term stability and simple integration, the TGS813 is ideal for gas detection and safety applications in industry and building technology. Smoke detector/sensor in desktop/wall-mounted housing detects smoke and gas Aluminium housing with bracket for wall mounting Multiple multiplexing = several multiplexing modules on one line Connection: 2x RJ45 (not compatible with ALL3000/400x) Recommendation for calibration For reliable commissioning of the ALL4454/TGS813, it is recommended that the sensor is first operated in fresh, well-aerated ambient air. After a sufficient warm-up time, the current measured value is recorded as a reference value for clean air. Suitable gas or smoke detector test spray can then be used for function testing and calibration. The changed sensor value measured in the process serves as a comparison or alarm value. By comparing the measured values of clean air and gas/smoke air, the difference can be clearly determined. On this basis, threshold values, rules and actions can be reliably defined in the MSR control centre or control system. Technical data: Element Specification Sensor type Smoke/gas sensor Meßrange: 0 to 100 Chip ADS1100A3 Connection: 2x RJ45 (I2C bus) Multiplexing: Pay attention to same sensor types at the port! -  see note below LED displays: 1x PWR, 1x BUS How to use: Metal walkway Environment: Temperature operation: -45 ~ 90 °C Humidity operating: 0 % ~ 100 % (non-condensing) Storage temperature: -20 ~ 60 °C Humidity storage: 5 % ~ 90 % (non-condensing) Labelling: CE, RoHS Dimensions: 79 x 50 x 24 mm (length x width x height) Weight: 230 grams (without packaging and accessories) Packaging contents: 1x ALL4454 smoke detector / sensor 1x connection cable Multiplexing - Note on operating multiple sensors on one sensor port In contrast to the ALL3000/4000, the ARM and MIPS-based systems allow more than one sensor to be operated on one physical port. sensor on one physical port. The hardware requirement is that the sensors have 2 RJ45 connections so that the sensor signal can be forwarded to the next sensor. The total cable length of 100 metres is not increased as a result. In order for the sensors to be uniquely identified by the devices, it is necessary for them to have have different I2C chip addresses and IDs. Sensors with the same chip address and adjustable ID can be combined. For sensors without an adjustable address, only 1 sensor type can be connected per port.

Highlights: Kompakte Smart-Steckdose in Slim-Bauform Besonders platzsparendes Gehäuse – ideal für beengte Einbausituationen Schutzkontaktsteckdose bis 10 A / max. 2300 W mit Powermessung ESP32-C6 Prozessor für zuverlässige und stabile Steuerung WLAN (2,4 GHz) & BLE 5.1 für flexible Konnektivität Zeitpläne, Timer & Alarme individuell konfigurierbar MQTT-fähig – ideal für Smart-Home-Integrationen Integrierter Powermeter (V, A, W, Hz, Leistungsfaktor, Scheinleistung) Sicherheitsfunktionen mit Strombegrenzung & Verhalten bei Stromausfall Die intelligente Smart-Steckdose ALL3079-S ist die besonders kompakte Slim-Ausführung der ALL3079-Serie. Das "S" steht für Slim und kennzeichnet das deutlich kleinere Gehäuse, das speziell für Anwendungen mit begrenztem Platzangebot entwickelt wurde. Dank des integrierten ESP32-C6 Prozessors sowie der Unterstützung von WiFi 2,4 GHz und Bluetooth Low Energy 5.1 bietet das ALL3079-S eine stabile, schnelle und flexible Steuerung – lokal oder über Smart-Home-Systeme. Die Schutzkontaktsteckdose schaltet zuverlässig Verbraucher bis 10 A bzw. ca. 2300 W und verfügt über eine integrierte Leistungsmessung, mit der Spannung, Strom, Leistung und Energieverbrauch jederzeit überwacht werden können. Auf eine USB-Ladefunktion wurde bewusst verzichtet, um das Gehäuse besonders kompakt zu halten. Individuelle Timer- und Zeitpläne, wahlweise nach Uhrzeit oder Sonnenauf- und -untergang, ermöglichen eine weitreichende Automatisierung. Über MQTT lässt sich das ALL3079-S nahtlos in bestehende Smart-Home-Umgebungen integrieren. Zusätzliche Schutzfunktionen wie die Konfiguration des maximalen Stroms und das definierbare Verhalten bei Stromausfall sorgen für einen sicheren Betrieb. Das ALL3079-S ist die ideale Lösung, wenn kompakte Abmessungen, Smart-Home-Funktionalität und kontrollierte Schaltleistung im Vordergrund stehen. Folgende Schaltmöglichkeiten sind möglich: WebGUI – Klick ON / OFF über Button MQTT An: all-esp/ALL3079-S/XXXXXXXXXXXX/1/relais on ? payloadAus: all-esp/ALL3079-S/XXXXXXXXXXXX/1/relais off ? payload HTTP API (in kommenden Firmware-Releases) Bluetooth BLE Android APK  https://fileshare.allnet.de/s/bMupAMdxZNv3vla Komponente Technische Details Prozessor Espressif ESP32-C6-Mini-1 Schaltleistung Relais 10 A / max. 2300 W mit Powermetering Kommunikationsmodus WiFi 2.4 GHz oder BLE 5.1 LED Schaltstatus Blau = Steckdose EIN Aus = Steckdose AUS Timerfunktion Ja – konfigurierbar für EIN oder AUS Zeitpläne Mo–So, basierend auf Uhrzeit oder Sonnenaufgang/Sonnenuntergang Alarme Konfigurierbar über Zeitpläne; SMTP-Server erforderlich Schutzeinstellungen & Default-Status Maximalstrom (Ampere) und Verhalten bei Stromausfall konfigurierbar MQTT Vollständig MQTT-fähig, Topics frei konfigurierbar Integrierter Powermeter Volt / Ampere / Watt / Hz / Leistungsfaktor / Scheinleistung Taster / Schalter ON / OFF Taste Abmessungen Kompakte Slim-Bauform (kleiner als Standardversion) Umgebung -10 °C bis +35 °C Gehäuse Kunststoff, Weiß

Highlights: 2-in-1 smart socket with USB fast charging Up to 30 W Power Delivery via 2× USB-C and 1× USB-A Powerful earthed socket outlet up to 16 A / 3680 W with power measurement ESP32-C6 processor for fast and stable control WLAN (2.4 GHz) & BLE 5.1 for flexible connectivity Schedules, timers & alarms individually configurable MQTT-capable – ideal for smart home integrations Integrated power meter (V, A, W, Hz, power factor, apparent power) Safety functions with current limiting & behaviour in the event of a power failure The intelligent smart socket combines powerful energy supply, modern USB fast charging and comprehensive smart home functions in one compact device. Thanks to the integrated ESP32-C6 processor and support for WiFi 2.4 GHz and Bluetooth Low Energy 5.1, stable, fast and flexible control is guaranteed at all times. The protective contact socket reliably switches loads up to 16 A or 3680 W and also offers integrated power measurement, which allows you to keep an eye on voltage, current, power and energy consumption at all times. At the same time, two USB-C ports and one USB-A port enable convenient charging of smartphones, tablets or other devices with up to 30 W Power Delivery Fast Charging. Customised timer and time schedules, either according to time or sunrise and sunset, ensure maximum automation. The socket can be seamlessly integrated into existing smart home systems via MQTT. Additional protective functions, such as the configuration of the maximum current and definable behaviour in the event of a power failure, increase safety and reliability in everyday life. Whether as a smart socket, USB charging station or smart home control centre, this device combines convenience, performance and control in a modern, space-saving design.. . Component Technical details Processor Espressif ESP32-C6-Mini-1 Switching capacity relay 1 socket outlet with earthing contact 16 A / 3680 W with power metering Switching capacity relay 2 USB ports Max. 30 W PD Fast Charging Communication mode WiFi 2.4 GHz or BLE 5.1 USB charging ports 1× USB-A 2× USB-C LED switching status Blue = Relay 1 socket outlet with earthing contact on Off = Relay 1 socket outlet with earthing contact off Timer function Yes Timer can be configured for ON or OFF for both relay 1 protective contact and relay 2 USB ports Time schedules Mo–So, based on absolute time or sunrise/sunset, configurable for relay 1 and relay 2. Alarms Alarms can be configured in the schedules. The SMTP server must be set up under "Advanced view" in the Alerts tab. Protection settings & Default status Configuration of the maximum current (amperes) and the default status in the event of a power failure is possible MQTT Sockets can be switched via MQTT. MQTT data is freely configurable Integrated power meter Volts / amps / watts / Hz / power factor / apparent power Integrated charging function for USB Max. 30 W (2× USB-C + 1× USB-A) fast charging USB-C1 / USB-C2 single port output: 5 V==3 A, 9 V==3 A, 12 V==2.5 A, 15 V==2 A, 20 V==1.5 A USB-A single port output: 5 V==3 A, 9 V==3 A, 12 V==2.5 A USB-A + USB-C multi-port output: 5 V==3 A Button / switch ON / OFF button Dimensions 98 × 65 × 72 mm Environment -10 °C to +35 °C How to use Plastic, white

Highlights: 4-fach WiFi Smart-Steckdosenleiste mit USB-Fast-Charging Vier einzeln schaltbare Schutzkontaktsteckdosen bis 16 A / 3680 W (Gesamtleistung) Integriertes Powermeter (Gesamtmessung) für Steckdosen und USB-Ladeports Manuelle Schalter direkt am Gerät – 4× Einzelschaltung + 1× Gesamtschalter Bis zu 30 W Power Delivery über 2× USB-C und 1× USB-A ESP32-C6 Prozessor für schnelle und stabile Steuerung WLAN (2,4 GHz) & BLE 5.1 für flexible Konnektivität Zeitpläne, Timer & Alarme individuell konfigurierbar MQTT-fähig – ideal für Smart-Home-Integrationen Sicherheitsfunktionen mit Strombegrenzung & Verhalten bei Stromausfall Die ALL3079-4 ist die leistungsstarke 4-fach Smart-Steckdosenleiste für professionelle Anwendungen im Büro, im Serverraum oder im anspruchsvollen Smart-Home-Umfeld. Sie kombiniert vier einzeln steuerbare Schutzkontaktsteckdosen, moderne USB-Fast-Charging-Technologie und eine umfassende Energieüberwachung in einem Gerät. Mit einer maximalen Gesamtleistung von 16 A bzw. 3680 W lassen sich mehrere Verbraucher zuverlässig schalten. Jede der vier Steckdosen kann bequem per WebGUI, MQTT oder Zeitplan gesteuert werden. Zusätzlich befinden sich physische Ein-/Aus-Schalter direkt an der Leiste: vier Taster für die einzelnen Steckplätze sowie ein separater Hauptschalter für die komplette Steckdosenleiste. Damit ist sowohl lokale als auch remote Steuerung jederzeit möglich. Das integrierte Powermeter (Gesamtmessung) erfasst Spannung (V), Strom (A), Leistung (W), Frequenz (Hz), Leistungsfaktor sowie Scheinleistung – und berücksichtigt dabei alle angeschlossenen Verbraucher inklusive der USB-Ladeports. So behalten Sie den vollständigen Energieverbrauch stets im Blick. Die integrierte USB-Ladeeinheit mit 2× USB-A und 1× USB-C unterstützt Power Delivery mit bis zu 30 W und ermöglicht schnelles Laden von Smartphones, Tablets und anderen Geräten – ganz ohne zusätzliche Netzteile. Dank des leistungsstarken ESP32-C6 Prozessors sowie WiFi 2,4 GHz und Bluetooth Low Energy 5.1 ist eine stabile und flexible Integration in bestehende Netzwerke gewährleistet. Über MQTT lässt sich die ALL3079-4 nahtlos in professionelle Smart-Home- oder IoT-Umgebungen einbinden. Individuelle Timer- und Zeitpläne (Mo–So, Uhrzeit oder Sonnenauf-/untergang) sowie definierbare Sicherheits- und Schutzfunktionen wie Strombegrenzung und Verhalten nach Stromausfall sorgen für maximale Kontrolle und Betriebssicherheit. Folgende Schaltmöglichkeiten sind möglich: WebGUI Klick ON/OFF je Steckdose oder Gesamt MQTT (frei konfigurierbare Topics je Relais) HTTP API (in kommenden Firmware-Releases) Bluetooth BLE Android APK Manuelle Schalter direkt am Gerät (4× Einzelschaltung + 1× Hauptschalter) Folgende Schaltmöglichkeiten sind möglich: WebGUI Klick ON/OFF auf den Button   MQTT  An: all-esp/ALL3079-4/508D52FEFF81/1/relais on -> payload Aus all-esp/ALL3079-4/508D52FEFF81/1/relais off -> payload HTTP API (in kommenden Firmware-Releases) Bluetooth BLE Android APK https://fileshare.allnet.de/s/bMupAMdxZNv3vla  Technische Daten: Komponente Technische Details Prozessor Espressif ESP32-C6-Mini-1 Schaltleistung Max. 16 A / 3680 W (Gesamtleistung) Anzahl Schutzkontaktsteckdosen 4× einzeln schaltbar USB Ladeports 2× USB-A 1× USB-C Max. 30 W PD Fast Charging Single Port USB Type-A Output: 30 W MAX (5 V=3 A, 9 V=3 A, 12 V=2.5 A) Single Port USB Type-C Output: 30 W MAX (5 V=3 A, 9 V=3 A, 12 V=2.5 A,15 V=2 A) USB Type-A + USB Type-C Multi-Port Output: 5 V=3 A MAX Powermeter Gesamtmessung: Volt / Ampere / Watt / Hz / Leistungsfaktor / Scheinleistung Messung inklusive USB-Verbrauch Kommunikationsmodus WiFi 2.4 GHz oder BLE 5.1 Manuelle Schalter 4× Ein/Aus je Steckdose 1× Hauptschalter Gesamt Timer & Zeitpläne Individuell je Steckdose konfigurierbar (Mo–So, Uhrzeit oder Sonnenstand) Schutzeinstellungen Strombegrenzung konfigurierbar, definierbarer Zustand nach Stromausfall Abmessung 300mm x 65mm x 41mm Umgebung -10 °C bis +35 °C Gehäuse Plastik, Weiß Use Cases – ALL3079-4 4-fach Smart-Steckdosenleiste (16A, Powermeter) IT-Systemhäuser & Managed Service Provider (MSP) Use Case: Remote-Reboot von Netzwerk- und IT-Komponenten Router, Firewalls, Access Points, NAS oder Switches können bei Störungen gezielt aus der Ferne neu gestartet werden – ohne Vor-Ort-Einsatz. Mehrwert: Reduzierung von Servicefahrten Schnellere Entstörung Individuell schaltbare Ports für gezielte Neustarts Energieverbrauchsüberwachung von IT-Infrastruktur Telekommunikations- & Netzwerkinstallateure Use Case: Standortüberwachung von PoE-Switches, Routern & LTE-Routern Die ALL3079-4 dient als intelligente Energieverteilung in Technikschränken oder Verteilerkästen. Mehrwert: Fernschaltung einzelner Komponenten Überwachung des Gesamtverbrauchs (inkl. USB-Geräte) Gezielte Stromabschaltung bei Wartung Hauptschalter für komplette Standortabschaltung Beleuchtungsbereich & Lichttechnik Use Case: Steuerung von Werbeanlagen, Schaufenster- oder Objektbeleuchtung Automatisierte Zeitpläne oder Schaltung nach Sonnenauf- und -untergang. Mehrwert: Energiecontrolling von Beleuchtungsanlagen Manuelle Einzelschaltung bei Service Integration via MQTT in Gebäudeautomation USB-Ladeports für Steuergeräte oder Controller Elektriker & Elektroinstallateure Use Case: Intelligente Nachrüstung in Bestandsinstallationen Ideal für Technikräume, Werkstätten oder Büros ohne aufwändige Neuverkabelung. Mehrwert: Einzelne Verbraucher gezielt steuerbar Messung des Gesamtstromverbrauchs Sicherheit durch Strombegrenzung Lokale Schalter + Remote-Zugriff Videoüberwachung & Sicherheitstechnik Use Case: Steuerung von NVR, Kameras, IR-Strahlern oder Peripherie Bei Fehlfunktionen kann gezielt nur die betroffene Komponente neu gestartet werden. Mehrwert: Erhöhte Systemverfügbarkeit Energieüberwachung kompletter Überwachungsanlagen Fernwartung via Netzwerk USB-Versorgung für Zusatzmodule (LTE, Backup-Systeme) Industrie 4.0 & Automatisierung Use Case: Energieüberwachung von Maschinenmodulen oder Steuerungseinheiten Ideal für Testaufbauten, Pilotanlagen oder dezentrale Industrieinstallationen. Mehrwert: Transparente Verbrauchsmessung Gezielte Abschaltung einzelner Module Integration via MQTT in bestehende Systeme Analyse von Lastprofilen Cybersecurity & Hochsicherheitsumgebungen Use Case: Physikalische Trennung von Systemen bei Sicherheitsvorfällen Im Ernstfall können Geräte sofort physisch vom Netz getrennt werden. Mehrwert: Notfall-Abschaltung per Fernzugriff Separates Schalten sensibler Komponenten Protokollierbare Energieüberwachung Kontrolle über Standby-Verbrauch IoT-Integratoren & Smart-Building-Anbieter Use Case: Zentrale Energie- und Gerätesteuerung in Smart Buildings Steuerung von Gateways, Sensor-Hubs, Edge-Devices oder Steuerzentralen. Mehrwert: MQTT-native Integration Zeitpläne & Automatisierung Monitoring von Energieverbrauch inkl. USB Skalierbar für größere Installationen Smart-Home-Installateure (Pro-Segment) Use Case: Technikzentrale für Heimautomatisierung Steuerung von Home-Server, KNX/IP-Gateway, NAS, Router, Alarmzentrale. Mehrwert: Saubere Energieverteilung im Serverschrank Remote-Reboot-Funktion Verbrauchsanalyse für Endkunden Professionelle Lösung statt Consumer-Steckdosen

Highlights:   compatible with ALL3418v2/3419/35xx/4500/5000 Carbon dioxide sensor "CO2 sensor" displays the values in ppm. Aluminium housing with bracket for wall mounting CO2 measuring range 0-40000ppm Measurement accuracy ± (30 ppm + 3% MV) / (25 °C, 400 - 10'000 ppm) Connections: 1x RJ45 input / 1x RJ45 output (no longer compatible with ALL3000/400x & ALL4504/4404 8 Port Multiplexer) ALL4471 - Sensor Module for HVAC and Indoor Air Quality Applications ALLNET Technology for IR detection enables highly accurate carbon dioxide measurement at a competitive price. Along with the NDIR measurement technology for CO2 detection. Thanks to the dual-channel principle for the measurement of carbon dioxide concentration, the sensor compensates for long-term drifts automatically by design. The very small module height allows easy integration into different applications. Carbon dioxide is a key indicator of indoor air quality. Thanks to new energy standards and better insulation, houses have be-come increasingly energy efficient, but the air quality can deteriorate rapidly. Active ventilation is needed to maintain a comfortable and healthy indoor environment, and to improve the well-being and productivity of the inhabitants. ALLNET´s ALL4471 offers accurate and stable CO2. This enables customers to develop new solutions that increase energy efficiency and simultaneously support well-being.   Technical Details: CO2 Sensor Specifications CO2 measurement range 0 - 40'000 ppm Accuracy ± (30 ppm + 3% MV) (25 °C, 400 - 10'000 ppm) Repeatability 10 ppm Temperature stability 2.5 ppm / °C (0-50 °C) Response time (t63) 20 s Humidity Sensor Specifications Relative humidity measurement range 0 - 100 % RH Typ accuracy ±3% RH (0-100% RH) Repeatability 0.1% RH Response time (t63) 8 s Electrical Specifications Supply voltage 3.3 - 5.5 V Average current  @ 2s measurement rate 19 mA Max. current 75 mA

Highlights: compatible with ALL34xx/35xx/4500/5000 Particulate matter sensor shows the values in µg/m3, particles per cubic cm  Aluminium housing with bracket for wall mounting Fine dust measuring range 1 to 1000 µg/m3 Measurement accuracy ±10 µg/m3 @ 0 to 100 µg/m3 / ±10 % @ 100 to 1000 µg/m3 Connections: 1x RJ45 input / 1x RJ45 output (no longer compatible with ALL3000/400x & ALL4504/4404 8 Port Multiplexer) Particulate Matter Sensor ALL4472 For HVAC and Air Quality Applications With this new particulate matter sensor, ALLNET expands its range of environmental sensing solutions and opens up a new dimension in indoor and outdoor air quality applications. The ALL4472 particulate matter (PM) sensor represents a new technological breakthrough in optical PM sensors. Its measurement principle is based on laser scattering and makes use of ALLNET's innovative contamination-resistance technology. This technology, together with high-quality and long-lasting components, enables accurate measurements from the device's first operation and throughout its lifetime of more than eight years. PM2.5 and PM10 refer to particulate matter with particle diameter up to 2.5 microns and 10 microns, respectively, and are among the most dangerous air pollutants. Due to their small size, PM2.5 particles can travel deep into the human lung and cause a variety of health issues; for instance, by triggering asthma attacks or contributing to cardiovascular disease. The ALL4472 will enable the implementation of innovative air quality monitoring devices that prevent air pollution damage.  Technical Details: Particulate Matter Sensor Specifications Mass concentration accuracy1 ±10 μg/m3 @ 0 to 100 μg/m3 ±10 % @ 100 to 1000 μg/m3 Mass concentration range 1 to 1000 μg/m3 Mass concentration resolution 1 μg/m3 Particle detection size range2 Mass concentration:   PM1.0, PM2.5, PM4 and PM10 Number concentration:  PM0.5, PM1.0, PM2.5, PM4 and PM10 Lower limit of detection 0.3 μm Minimum sampling interval 1 sec (continuous mode) Lifetime > 8 years operating continuously 24h/day Dimensions 40.6 x 40.6 x 12.2 mm3 Operating temperature range -10 to +60 °C Storage temperature range -40 to +70 °C Electrical Specifications Interface UART, I2C, RJ45 "ALLNET" Supply voltage 4.5 – 5.5 V Average supply current @ 1 Hz measurement rate < 60 mA 1 Specified for PM2.5 at 25 °C using potassium chloride salt particles and the TSI DustTrakTM DRX Aerosol Monitor 8533 as a reference. 2 PMx defines particles with a size smaller than "x" micrometers (e.g., PM2.5 = particles smaller than 2.5 μm).

Your smart entry into building automation – ALLNET ALL3500v2 With the ALLNET ALL3500v2 building automation centre, you get a cost-effective and versatile platform that is optimally tailored to semi-professional requirements. Thanks to state-of-the-art technology, high connectivity and a wide range of applications, the ALL3500v2 is the perfect partner for your automation projects. Highlights at a glance: Cost-efficient platform: Maximum functionality with minimum space and cost requirements. Intuitive operation: Can be conveniently controlled via web interface (HTTP/HTTPS) or smartphone. Flexible data connection: Integration via JSON, MQTT or SNMP possible. Versatile sensor technology: Comprehensive monitoring of temperature, humidity, air pressure and more. Future-proof: Expandable with i2C sensor ports and compatible with a wide range of ALLNET sensors and actuators. Features that impress The ALL3500v2 is based on a stable embedded Linux platform (MIPS or ARM architecture), which enables seamless integration into existing systems. With four RJ45 ports for sensor modules, you can realise a wide range of control and monitoring tasks. Whether local control or cloud-based applications - the ALL3500v2 offers you all the tools you need to organise your building automation efficiently and securely. Versatile application options: HACCP temperature monitoring: Precise detection and control in critical environments. Room climate control: Monitoring of temperature and humidity for demand-based control of heaters or humidifiers. Security management: Detection of gas odour, smoke or water ingress and triggering of alarms. Automated garden irrigation: Time and humidity-controlled for maximum efficiency. Energy consumption optimisation: Control based on consumption data from external sensors (e.g. ALL4590/4490 power meter). Compact, powerful, versatile The ALL3500v2 combines a variety of functions in a compact design that has been specially developed for space-saving installations. With four relays, sensor ports and contact interfaces, it can be used flexibly and provides the basis for sophisticated automation solutions - ideal for private and commercial applications. Why ALLNET ALL3500v2? With the ALL3500v2 you get a reliable and economical solution for building automation. From monitoring and control to integration into complex installations, this central unit offers everything you need for smart, efficient and future-proof automation. Start your building automation now with the ALLNET ALL3500v2! Versatile sensors, actuators and switching options for your automation The ALLNET ALL3500v2 impresses with its flexibility and functionality: With four ports for external sensors and actuators, four relay outputs for controlling loads and four contact inputs for buttons or switches, it provides an ideal basis for complex automation applications. Sensing and control – Precise and versatile With the ALL3500v2, you can measure and analyse a variety of environmental parameters such as temperature, humidity or air pressure and execute automatic switching operations based on them. Control is either manual, time-controlled or dynamic, based on the measured values. Connectivity that inspires The ALL3500v2 is equipped with Ethernet and built-in WLAN, which enables easy integration into existing networks. Using an IP address in the TCP/IP network, you can: Retrieve and edit measurement data directly in the web browser. Receive automated notifications and reports by email. Request and control data via JSON or XML interfaces. Optional MQTT support enables the transmission of data to the cloud and integration into IoT environments. With its powerful connectivity and flexible control options, the ALL3500v2 is the perfect choice for efficient and future-proof building automation.   I²C-Bus – Intelligent use of existing cable networks The ALLNET ALL3500v2 enables an uncomplicated connection of measurement and control modules via a standard network cable (RJ45, Cat. 5). This allows you to continue using existing cable infrastructures such as network or telephone cabling and saves costs and effort during installation. Advantages of the I²C bus system: Simple cabling: A standard network cable is sufficient to connect sensors and modules. Long range: Up to 100 metres of cable between the central unit and module. Integrated power supply: The modules are supplied with power directly from the central unit – no separate power source required. USB port – external memory connection The USB port on the ALLNET ALL3500v2 allows you to integrate external storage media easily and flexibly. This allows data to be saved and processed directly on connected USB devices. This enables extended data logging and analysis. Maximum number of sensors per ALL3500v2: Technical data: Element Specification Interfaces: 4x RJ45 for sensor modules Network connection: 1x RJ45 10/100Mbps Switching relay: 4x potential-free Contact input: 4x for push-buttons, switches, etc. Wireless LAN: Mediatek MTK7688 SOC chipset 2.4 GHz Wireless N Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Other interfaces: 1x USB 2.0 1x console Power supply: 100~240 VAC, 50/60 Hz, external power supply Power consumption: <5 watts maximum How to use: Metal walkway Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Labelling: CE, RoHS Dimensions: 220.4 x 80 x 30 mm (length x width x height) Weight: 400 grams (device incl. WLAN antenna and ALL3006 sensor) Packaging contents: -ALLNET ALL3500v2 -ALLNET ALL3008 temperature sensor -WLAN antenna -External power supply -Operating instructions