Temperature measurement via network easy made Highlights: detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network Robust metal housing Brackets for attachment to wall Suitable for all operating systems 1x ALL3006 Temp-Sensor including Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API Optional Free-Software Modules like SNMP  / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean / The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage. The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems. The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/ Intelligent features and programming by switching matrix Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists. Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol.   Flexible installation options The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary.   Borderless Cross-site temperature measurement Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc. Maximum number of sensors per ALL3419:       Element Specification Sensor interface: 3x RJ45 for sensor/actor modules 1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise" 1x RJ45 Console Port for Serial-Connection Ethernet: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN 2,4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power source: 100~240 VAC, 50/60 Hz Power Consumption: <3 watt in operation Housing: metal housing Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 70 °C Storage humidity: 5% ~ 90% (non-condensing) Regulatory: CE, RoHS Dimensions: 92 x 85 x 24 mm (L x W x H)  Weight: 134 g (ALL3419 with ALL3006 sensor) Package content: -ALLNET ALL3419 -ALLNET ALL3006 temperature sensor -WLAN antenna -External power supply -Quick installation guide

Your smart entry into building automation – ALLNET ALL3500v2 With the ALLNET ALL3500v2 building automation centre, you get a cost-effective and versatile platform that is optimally tailored to semi-professional requirements. Thanks to state-of-the-art technology, high connectivity and a wide range of applications, the ALL3500v2 is the perfect partner for your automation projects. Highlights at a glance: Cost-efficient platform: Maximum functionality with minimum space and cost requirements. Intuitive operation: Can be conveniently controlled via web interface (HTTP/HTTPS) or smartphone. Flexible data connection: Integration via JSON, MQTT or SNMP possible. Versatile sensor technology: Comprehensive monitoring of temperature, humidity, air pressure and more. Future-proof: Expandable with i2C sensor ports and compatible with a wide range of ALLNET sensors and actuators. Features that impress The ALL3500v2 is based on a stable embedded Linux platform (MIPS or ARM architecture), which enables seamless integration into existing systems. With four RJ45 ports for sensor modules, you can realise a wide range of control and monitoring tasks. Whether local control or cloud-based applications - the ALL3500v2 offers you all the tools you need to organise your building automation efficiently and securely. Versatile application options: HACCP temperature monitoring: Precise detection and control in critical environments. Room climate control: Monitoring of temperature and humidity for demand-based control of heaters or humidifiers. Security management: Detection of gas odour, smoke or water ingress and triggering of alarms. Automated garden irrigation: Time and humidity-controlled for maximum efficiency. Energy consumption optimisation: Control based on consumption data from external sensors (e.g. ALL4590/4490 power meter). Compact, powerful, versatile The ALL3500v2 combines a variety of functions in a compact design that has been specially developed for space-saving installations. With four relays, sensor ports and contact interfaces, it can be used flexibly and provides the basis for sophisticated automation solutions - ideal for private and commercial applications. Why ALLNET ALL3500v2? With the ALL3500v2 you get a reliable and economical solution for building automation. From monitoring and control to integration into complex installations, this central unit offers everything you need for smart, efficient and future-proof automation. Start your building automation now with the ALLNET ALL3500v2! Versatile sensors, actuators and switching options for your automation The ALLNET ALL3500v2 impresses with its flexibility and functionality: With four ports for external sensors and actuators, four relay outputs for controlling loads and four contact inputs for buttons or switches, it provides an ideal basis for complex automation applications. Sensing and control – Precise and versatile With the ALL3500v2, you can measure and analyse a variety of environmental parameters such as temperature, humidity or air pressure and execute automatic switching operations based on them. Control is either manual, time-controlled or dynamic, based on the measured values. Connectivity that inspires The ALL3500v2 is equipped with Ethernet and built-in WLAN, which enables easy integration into existing networks. Using an IP address in the TCP/IP network, you can: Retrieve and edit measurement data directly in the web browser. Receive automated notifications and reports by email. Request and control data via JSON or XML interfaces. Optional MQTT support enables the transmission of data to the cloud and integration into IoT environments. With its powerful connectivity and flexible control options, the ALL3500v2 is the perfect choice for efficient and future-proof building automation.   I²C-Bus – Intelligent use of existing cable networks The ALLNET ALL3500v2 enables an uncomplicated connection of measurement and control modules via a standard network cable (RJ45, Cat. 5). This allows you to continue using existing cable infrastructures such as network or telephone cabling and saves costs and effort during installation. Advantages of the I²C bus system: Simple cabling: A standard network cable is sufficient to connect sensors and modules. Long range: Up to 100 metres of cable between the central unit and module. Integrated power supply: The modules are supplied with power directly from the central unit – no separate power source required. USB port – external memory connection The USB port on the ALLNET ALL3500v2 allows you to integrate external storage media easily and flexibly. This allows data to be saved and processed directly on connected USB devices. This enables extended data logging and analysis. Maximum number of sensors per ALL3500v2: Technical data: Element Specification Interfaces: 4x RJ45 for sensor modules Network connection: 1x RJ45 10/100Mbps Switching relay: 4x potential-free Contact input: 4x for push-buttons, switches, etc. Wireless LAN: Mediatek MTK7688 SOC chipset 2.4 GHz Wireless N Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Other interfaces: 1x USB 2.0 1x console Power supply: 100~240 VAC, 50/60 Hz, external power supply Power consumption: <5 watts maximum How to use: Metal walkway Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Labelling: CE, RoHS Dimensions: 220.4 x 80 x 30 mm (length x width x height) Weight: 400 grams (device incl. WLAN antenna and ALL3006 sensor) Packaging contents: -ALLNET ALL3500v2 -ALLNET ALL3008 temperature sensor -WLAN antenna -External power supply -Operating instructions

Highlights: Maintenance-free and long service life Compact size with 8,5cm diameter no moving parts therefore no wear due to the integrated ultrasonic sensors 20m long connection cable from central unit to sensor Protrokollierung of the measured values in the central unit possible export of the sensors as CSV or optional with module via FTP or to the cloud The ALL3420 Ultrasonic Wind Speed and Direction Sensor is a measuring device that can be used to detect the wind speed and direction in the outdoor air. The sensor is designed to be mounted at the highest point of your building to detect and measure/log the wind direction and speed, etc. The sensor can also be used to measure the wind speed and direction. Based on this data, you can then use the optional ALLNET MSR devices to switch/retract the blinds or other actuators to prevent damage to the building.   Place of use: At the highest point of your building to retract blinds & awnings in case of danger. Weather station for meterological purposes Weather station for agriculture and farmers Weather station for construction sites / cranes etc.  weather station at the beach any kind of wind alarm / measurement Technical Details: Element Specification Interfaces: 1x NMEA RS485 Wind speed & Wind direction sensor 1x I2C sensor port for optional ALLNET sensors or actuators 1x 100Mbit RJ45 LAN with integrated PoE IEEE802.3af 1x USB 2.0 Type A 1x RJ45 for console (programmer/interface) 1x 5,5mm/2,1mm DC Female for 12V/1A power supply Measuring range: 0-40m/s (wind speed) 0-359° (wind direction) Precision: Low wind speed:(0-5)m/s:±0.5m/s (wind speed) High wind speed:(5-40)m/s:±1m/s (wind speed) Lowwindspeed:(0-5)m/s:±0.5° (wind direction) Highwindspeed:(5-40)m/s:±3° (wind direction) resolution factor: 0.1m/s (wind speed) 1° (wind direction) Cable lenght: 20m Cable (from IP Main unit to the sensor) Network connection: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN Chipset 2.4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power supply: 100~240 VAC, 50/60 Hz, 12V / 1A external power adapter Power consumption: <3 watts maximum Housing: Metal Environment: Operating temperature: 0 ~ 40 °C (IP Mainunit) Operating temperature: -40° ~ +70° (Windsensor IP65) Operating humidity: 10% ~ 85% (non-condensing) Operating humidity: 0 ~ 100% (Windsensor IP65) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Marks CE, RoHS, RED Dimensions: IP65 Windsensor 11cm (height) x 8,5cm (diameter) Ø5cm diameter socket to the mount Mounting Kit 19,6cm (height) x 11cm (feet) Ø5,6cm diameter for windsensor IP Main-Unit 9,3cm (width) x 8,7cm (length) x 2,7cm (height) Weight: 2,5kg Package contents: - IP Mainunit ALL3420 - ALL3420 Ultrasonic Sensor - Mount  - 20m Cable to the Sensor - Power supply external "12VDC / 1A - Patchcable - WiFi Antenna - QIG

Optional language module for Starlink 4G Plug-on module to enable voice calls. Over 320 preconfigured words, up to 40 customised voice prompts and audio files. Additional announcements can be converted and recorded using Windows TEXT to SPEACH software. PLEASE NOTE: Only works in combination with Starlink 4G car radio and converts the car radio into a voice car radio.

Universal WLAN with 4G/LTE technology – STARLINK 4G B PRO STARLINK 4G offers universal connectivity to intrusion detection systems or alarm systems. With the optionally available voice module, it can also be used as a telephone dialler. With 4G technology and the capacity for two SIM cards, security and efficiency are always guaranteed. The development of telecommunications and mobile phone networks is constantly progressing. In order to make room for more efficient mobile communications technologies such as 5G, 2G mobile networks have been gradually being switched off in Switzerland since the end of 2020. Germany will follow suit from the end of June 2021 with the shutdown of the 3G networks of Deutsche Telekom, Vodafone and O2. However, many existing systems still transmit via 2G/3G and replacing the existing handset is often not so easy to implement. With the STARLINK 4G universal alarm unit, it is possible to connect to a wide range of intruder alarm systems from other manufacturers or to analogue telephone handsets. EASE OF CONNECTION The connection is very simple: The STARLINK 4G enables connection to central offices or exchanges that still use an analogue PSTN telephone connection. The STARLINK 4G receives this on its simulated analogue connection and then dials the number accordingly via the mobile network. In addition, the analogue CONTACT-ID/SIA DC 03/05 control centre protocols of the control centres or monitoring stations can also be transmitted to control centres via mobile radio via this simulated analogue connection. This goes so far that the STARLINK 4G receives these analogue CONTACT-ID/SIA DC 03/05 protocols, automatically converts them to CONTACT-ID / SIA DC 09 and can therefore transmit them to a control centre via IP 2G/3G/ LTE/4G. In addition, it has five freely programmable conventional switching inputs and a fixed input for external sabotage contacts. Furthermore, three of the inputs can be programmed as open collector transistor outputs. The programming of the control unit is conveniently carried out via a USB connection and software. The handset can accommodate two SIM cards (dual SIM). It is possible to send an automatic routine/test message with freely adjustable times. EXPANDABLE FOR LANGUAGE TRANSMISSION The optional DIGIVOC voice module is available for voice transmission. This is attached to the car warmer and offers 320 pre-installed words and up to 40 user-defined announcement texts. Main features: Universal compatibility: Easy integration into existing intruder alarm systems and analogue alarm units, even with older installations. 4G technology: Future-proof communication via 2G/3G/4G/LTE networks. Dual SIM: Dynamic management of two SIM cards for maximum operational reliability. Simulated PSTN connection: Supports analogue CONTACT-ID/SIA protocols with automatic conversion to IP protocols. Voice transmission: Optional DIGIVOC voice module enables voice calls with 320 pre-installed words and up to 40 customised greetings. Programmable inputs/outputs: Five conventional inputs, three of which can be used as open collector outputs, as well as a tamper contact. Flexibility in control: Activation of outputs via call dial tone or SMS. Easy installation and operation: Plug & Play: Quick and uncomplicated commissioning. USB interface: Convenient programming via PC software. Compact design: Space-saving housing with robust sheet steel and ABS plastic. Expansion options: DIGIVOC voice module: Enables voice calls and customised announcements. Technical data: Type of connection Conventional inputs / PSTN simulation Nominal voltage 12 V DC Current consumption maximum 320 mA Conventional zones maximum 5 Transistor output maximum 3; GND switching, 50 mA each (open collector) Sabotage line 1 Audio voice output Voice call (in conjunction with voice module DIGIVOC) Integrated interface Simulated analogue PSTN connection &transmission types Voice message, Contact ID/SIA DC-05, Contact ID IP/SIA IP DC-09, SMS How to use White painted sheet steel (top) and ABS plastic (lid) Maße housing 164 x 110 x 36 mm Dimensional assembly 120 x 75 x 25 mm Compatibility Universal, relay modules XMR 2 & MR 4, Compatible CONT SAT W (with battery slot 12 V DC / 2.1 Ah) Application areas: Ideal for specialised companies that want to convert existing systems to modern mobile radio technologies without replacing the entire infrastructure. Perfect for alarm systems, control centres and remote control applications. Get the reliable and flexible solution for your security requirements now!