Go to homepage
Your account
Log in
or sign up
Overview Your profile Addresses Payment methods Orders
€0.00*
Home
Products
The company
Catalogues
Support
Downloads
Show all Products
ALLDAQ Messtechnik
Analog
In
Out
Stromsenken
Multi I/O
Relais
19" Systeme
SET
Digital-I/O
Signalkonditionierung
SCU
Zubehör
Kalibration
Anschlussblöcke
Kabel
Laborinstrumente
Multimeter
Siglent SDM3000X-Serie
Oszilloskope
Siglent SDS1000 Serie
Siglent SDS1000X-E Serie
Siglent SDS2000X Serie
Siglent SDS2000X-Plus Serie
Siglent SDS5000X Serie
Siglent SDS6000 Serie
Siglent SHS800-Serie
Logic Analyzer
Signalgeneratoren
Siglent SDG800-Serie
Siglent SDG1000X-Serie
Siglent SDG2000X-Serie
Siglent SDG6000X-Serie
Siglent SSG3000X-Serie
Spektrumanalysatoren
Siglent SSA3000X-Plus-Serie
Siglent SSA3000X-R-Serie
Siglent SVA1000X Serie
Siglent SNA5000 Serie
Siglent SSA3000X-Serie
Labornetzgeräte
Siglent SPD1000X-Serie
Siglent SPS5000X-Serie
Siglent SPD3303C-Serie
Siglent SPD3303X/X-E-Serie
Mikroskope
Zubehör
Elektronische Lasten
Siglent SDL1020X / X-E
Messen, Steuern, Regeln
Messen-Steuern-Regeln über IP
MSR-Zentralen
Multiplexer
Aktoren
Sensoren
Analoge Erfassung, Multi-I/O
Analoge Ausgabe
...nach Produktfamilien
ADQ-LB Serie
ADQ-10-Serie
ADQ-210-Serie
ADQ-250-Serie
ADQ-330/340-Serie
ADQ-412
ADQ-610-Serie
Kabel-Testsysteme
Zubehör Hard-/Software
Dienstleistungen
Basisgeräte & Erweiterungen
M2Z
M3Z
HVX
M4
Basisgeräte & Erweiterungen
M3U
Interface-Platinen
Cami Reserarch
Zubehör Hardware
Messinstrumente & Netzgeräte
Zubehör für Cleverscope
EMV-Messtechnik
EMV-Precompliance-Hardware
EMV Abschirmungen
EMV Antennen
EMV Kopplungs- u Entkopplungsnetzwerke CDN
HF Stromwandler
Netznachbildungen (LISNs)
TEM-Zellen
HF-Verstärker
HF-Kabel
EMV-Zubehör
EMV-Precompliance-Software
Schnittstellen
Konverter
Zubehör
Hubs
USB
Sonstige
Isolatoren
USB
USB-MED
LAN
Laborausstattung
Digital-Mikroskope
Vorwort
Entwicklung
RMA
Software
Show all categories LAN Back
  • Show LAN
  1. Products
  2. Schnittstellen
  3. Isolatoren
  4. LAN
  • Products
    • ALLDAQ Messtechnik
    • Laborinstrumente
    • Messen, Steuern, Regeln
    • Kabel-Testsysteme
    • Messinstrumente & Netzgeräte
    • EMV-Messtechnik
    • Schnittstellen
      • Konverter
      • Zubehör
      • Hubs
      • Isolatoren
        • USB
        • USB-MED
        • LAN
    • Laborausstattung
  • The company
  • Catalogues
  • Support
Filter
–
ALLNET / ALL-LAN-ISO-4kV, Aislador Gigabit LAN/Bloqueador PoE 4kV
ALLNET / ALL-LAN-ISO-4kV, Aislador Gigabit LAN/Bloqueador PoE 4kV
Highlights: Gigabit Ethernet (10/100/1000MBit/s) IEEE 802.3ab compliant 4kVrms Dielectric strength Galvanic isolation: Creepage distance: 12.8mm, Clearance distance: 12.2mm no restrictions on cable length ESD protection: suppression of transient overvoltages on the signal lines suitable for devices with a supply voltage up to 250 Vrms Not suitable for use with PoE devices Dimensions 80x58x24mm Plug&Play - no installation required Compact and universally applicable No permanently mounted cables Robust housing Suitable for all systems with one network connection requires no power supply APPLICATIONS: DEVICE PROTECTION Protection of especially valuable devices against hum and surge voltages from the network periphery. MEASUREMENT TECHNOLOGY Protection of electrical measuring and monitoring equipment against external and interference voltages from the Ethernet cabling. POTENTIAL DIFFERENCES (BUILDING SERVICES ENGINEERING) Prevention of equipotential bonding currents in computer systems which are connected by an Ethernet cabling are galvanically connected to each other over longer distances. AUDIO Reduction of low-frequency alternating voltages (network hum), which are caused by the network connection to an imperceptible degree. Technical Details: Dielectric strength signal and shield 5000 V 50/60 Hz over 1 min; 10.000 VDC over 10 s Data throughput 10/100/1000 MBit/s Connections 2x J45 input/output Network specifications IEEE 803.2 from 10/100/1000-BaseT, twisted pair, auto-conf. (behaves completely transparent in the network) Material 94V-0/RoHS compliant/SvHC/REACH Product Rating (UL) Passive, electronic components, insulation level DI (250 VAC/300 VDC) tested at 4 kVAC Operating mode Continuous operation Operating time between failures 0,21x 108 (1 failure in 21,000,000 h) ESD 16 kV DC Stress-Test (10 s) 10 kV Return Loss min. 10 dB Insertion Loss max. 1,3 dB Dimensions (mm, LxWxH) 80 x 58 x 24, ca. 39 g Standards IEC 60601-1 1x MOPP up to 250Vrms (the built-in network transformer) Environment Operation and storage: -40...+70°C 10...75% rel. humidity non-condensing

€39.82*
Service hotline

Service and Support: +49 (0)89 894 222 - 474 sales@alldaq.com

Or via our contact form.
Service
  • Imprint
  • Terms and Conditions
  • Privacy
  • Cancellation policy
  • RMA
  • Sepa

    * All prices excl. VAT plus shipping costs and possible delivery charges, if not stated otherwise.

    Realised with Shopware
    This website uses cookies to ensure the best experience possible. More information...