ALLDAQ Shop
Our offer is directed exclusively at commercial customers in the sense of §14 BGB.
ALLNET ALL3419 / IP Building-Autom. 3x I2C, 1x USB, LAN/WLAN

ALLNET ALL3419 / IP Building-Autom. 3x I2C, 1x USB, LAN/WLAN


145,05 EUR

19 % VAT plus. excl. Shipping costs

Product no.: 134571
Shipping time: 3-4 Days

Datasheet

Temperature measurement via network easy made

Highlights:

  • detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network
  • Robust metal housing
  • Brackets for attachment to wall
  • Suitable for all operating systems
  • 1x ALL3006 Temp-Sensor including
  • Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API
  • Optional Free-Software Modules like SNMP  / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean /


The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage.

The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems.

The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/

Intelligent features and programming by switching matrix

Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists.

Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol.
 

Flexible installation options

The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary.
 

Borderless Cross-site temperature measurement

Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc.

 

Element

Specification

Sensor interface:

3x RJ45 for sensor/actor modules
1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise"
1x RJ45 Console Port for Serial-Connection

Ethernet:

1x RJ45 10/100Mbps

Wireless LAN:

Ralink/Mediatek MT7688AN
2,4 GHz Wireless N, up to 150 Mbps
Security: WEP 64/128bit, WPA, WPA2

Standards:

IEEE 802.3
IEEE 802.3u
IEEE 802.11b/g/n

Power source:

100240 VAC, 50/60 Hz

Power Consumption:

<3 watt in operation

Housing:

metal housing

Environment:

Operating temperature: 0 40 °C
Operating humidity: 10% 85% (non-condensing)
Storage temperature: -20 70 °C
Storage humidity: 5% 90% (non-condensing)

Regulatory:

CE, RoHS

Dimensions:

92 x 85 x 24 mm (L x W x H) 

Weight:

134 g (ALL3419 with ALL3006 sensor)

Package content:

-ALLNET ALL3419
-ALLNET ALL3006 temperature sensor
-WLAN antenna
-External power supply
-Quick installation guide



27,03 EUR

19 % VAT plus. excl. Shipping costs

Art-Nr.: 27166





77,25 EUR

19 % VAT plus. excl. Shipping costs

Art-Nr.: 34418







45,72 EUR

19 % VAT plus. excl. Shipping costs

Art-Nr.: 98824







61,49 EUR

19 % VAT plus. excl. Shipping costs

Art-Nr.: 98840




Product 1 of 3 in this category

Quick purchase

Please enter the article no. from our catalogue.

Newsletter subscription

Signup for our free newsletter now.