Insulated multi-function data acquisition card for universal use in industry and laboratory

The ALLDAQ ADQ-341 has a separately isolated A/D and digital I/O section. The multi I/O DAQ board is equipped with 16 differential 18-bit analog inputs, 8 isolated digital inputs, 8 isolated digital outputs, 16 TTL digital I/Os and special functions such as 32 bit meter, I²C bus, incremental encoder, frequency meter and PWM output.

• Multifunction data acquisition card with CompactPCI interface
• 16 isolated differential voltage inputs
• insulation voltage A/D part: 1500 VDC (60 s)
• 18 bit A/D converter per channel group with sampling rates between 200 kS/s and 800 kS/s*
• Input ranges: ±10,24 V, ±5,12 V, 0-10,24 V, 0-5,12 V
• 8 isolated digital inputs (High: 11..35 V)
• 8 isolated digital outputs with power driver up to 600 mA per output
• 16 TTL-DIOs (3.3 V or 5 V switchable), max. 20 mA per output
• Insulation voltage DIO part: 500 VAC
• Digital trigger input isolated:
  • 8 analog inputs each (AI module) one external trigger input
• &“monitoring of the digital inputs for bit &“change with interrupt generation
• Streaming operation for continuous input/output via DIO ports up to 10 kHz**
• Special functions via HDMI connector (in preparation):
  • 1 x 32 bit Zähler up to 66 MHz (Input: Enable, ext. trigger, ext. clock, Output: strobe)
  • 1 x I²C-Bus up to 400 kHz (clock: SCL, data: SDA)
  • 1 x incremental encoder (A input, B input, ext. reset input)
  • 1 x Frequency measurement input up to 10 MHz (Zähl input)
  • 1 x PWM output, pulse duty factor adjustable (Enable input, PWM output)
• Optionally suitable connection cables (68-pin VHDCI or HDMI cables)
• Optional Special terminal block for ADQ-300 series

Software Support

• Driver for Windows 10/8.1/8/7 (32/64 bit)
• Programming support (SDK) with examples for C++, C#, Visual Basic, Delphi/Pascal and Python inclusive
• ALLDAQ Manager - utility software provides central access to ALLDAQ driver system parameters and help files
• Virtual Instruments (VIs) for LabVIEW™
• MATLAB^®-Interface with examples and help file

Apply for a calibration certificate?

We cooperate with independent DAkkS-accredited testing laboratories.
Talk to us!

*sampling rate depends on number of actively used channels per channel group (AI module), one channel group consists of 8 channels (1 channel: 800 kS/s, 2 channels: 550 kS/s, 8 channels: 200 kS/s)

**Depends on operating system and computer configuration.